奥赛罗密封首页ProductsTechnicalAbout usContact
DATE: 2024-03-29
  The current position:Home > Technical > Technical data
Technical data
Technical service
News information
  Dust Seal
  Piston rod seal
  Piston seal
  Static seal
  Guiding support ring
  Rotating seal
  Retaining ring
Tel: 86-0311-87319186
        86-0311-87316999
Fax: 86-0311-87316333
E-mail: oth01@othchina.com
              oth02@othchina.com
Skype: aimee.oth
             penny.oth

PTFE linear expansion coefficient
Date:2015-04-11 16:27:50    Browsed:188    Source:www.othchina.com

  Currently for the requirements of high corrosion resistance and using temperature more then 100 degree, the sealing elements mostly choose PTFE or filled PTFE, this is mainly because PTFE has the performance such as good chemical resistance, ageing resistance, low friction coefficient, wide usage temperature range, no-stick and so on. Mechanical properties of PTFE influence significantly by the temperature and load.

  The PTFE compression modulus, compression stress and tensile stress changes due to the temperature level, It under different compression and tensile stress strain also change accordingly, its compression deformation varies with the temperature and load.

  PTFE crystallization volume increase 0.0058cm3/g in the 19℃, equivalent to increase 1.2% volume, so its linear expansion coefficient sudden increase in the temperature of 19℃, and at 30℃ is another turning point, volume change is 10%.

  The linear expansion coefficient of the filled PTFE has a direction, in parallel to the direction of the preforming pressure linear expansion coefficient is higher than the linear expansion coefficient of perpendicular to the direction of preforming pressure, the former is about 40% higher than the latter.

previous:The advantage of packing tool    next:Metal spiral wound gasket Installation steps
奥赛罗 Add: 025-106,No.319,Xiangjiang Road,High-Tech Zone,Shijiazhuang,Hebei,China