奥赛罗密封首页ProductsTechnicalAbout usContact
DATE: 2024-11-09
  The current position:Home > Technical > Technical data
Technical data
Technical service
News information
  Dust Seal
  Piston rod seal
  Piston seal
  Static seal
  Guiding support ring
  Rotating seal
  Retaining ring
Tel: 86-0311-87319186
        86-0311-87316999
Fax: 86-0311-87316333
E-mail: oth01@othchina.com
              oth02@othchina.com
Skype: aimee.oth
             penny.oth

Radial lip seals
Date:2016-05-27 11:06:41    Browsed:768    Source:http://www.othchina.net

  Radial lip seals made from PTFE-compounds are used more and more frequently for the sealing of crank shafts in the automotive industry.

  Due to wear the seal loses material and finally fails. State-of-the-art is the experimental determination of the tribological behaviour on a test rig with pin-on-disc apparatus with the help of which the wear behaviour of sealing systems, especially of PTFE seals,can be predicted. Because of the non-linear elasto-viscoplastic material properties of the sealing aterial the history-dependent sealmounting process has to be followed in the finite element analysis FEA . A new FEA procedure is presented which can meet these.

  demands. It is based on a modified iterative ‘rezoning’ procedure. Under the assumption that the lip wears out according to the magnitudeof the contact stress maximum wear at maximum contact stress the node oordinates of the seal contact surface are modified according.

  to the node contact forces. Comparisons between numerical simulations and long-term service seals are made. The experiments also

  indicate under which radial load the seal can withstand insufficient lubrication which occurs in practical use without much wear.

  More details for hydraulic seal, pls click http://www.othchina.net, or email to oth01@othchina.com

previous:Measurement of seal friction    next:PTFE lip seals
奥赛罗 Add: 025-106,No.319,Xiangjiang Road,High-Tech Zone,Shijiazhuang,Hebei,China